Surf

Construction
Neonseam
Panels are glued and blindstitched and finished with a 4mm razor thin coloured liquid silicon based urethane. The result being a strong yet flexible seam that is watertight and durable whilst reducing the abrasion to skin.
View Products Discover More
Liquidseam
Panels are glued and blindstitched. The seam is then sealed using a coloured liquid silicon based urethane which reinforces the seam giving each suit a 100% water seal.
Blindstitch
Panels are double glued and then butted together followed by stitching that does not penetrate all the way through the neoprene. Inside the wetsuit, heat welded tape goes over the seams in high stress areas, this further strengthens the seams.
Flatlock
Neoprene is lapped together and then stitched, this creates a flat, flexible and comfortable seam. Flatlock stitching can be identified by a band of interlocked thread on both sides of the wetsuit, sometimes utilising a coloured thread for visual effect.
Features
Boltdry
Introducing BOLT DRY,Guls’ exclusive fastest drying neoprene yet. The ultra quick dry core wicks water away from the skin creating a cushion of air between the body and suit, giving ultimate insulation and warmth.
Revo Fit
Revo Fit has been created using innovative pattern cutting technology producing our finest fitting wetsuits. This 3D fit results in a higher level of comfort and has been improved through intensive team rider testing.
Titanium 2
Used in the main body panels of most of our wetsuits. T2 Neoprene acts in a similar way to a survival blanket, and reflects body heat back to the body.
Thermospan
Engineered by our scientists so that your core body temperature locks in the heat. By wicking away your body moisture the lightweight thermal insulation traps warm air all around you. Keeping your core body warm helping blood to pump around your body creating your own central heating system.
Aero-comb
Aero-Comb minimises weight while maximising its internal area, this space allows trapped air to heat up and insulate your core.
Snakeskin
Durable, water repellant and anti-abrasive membrane applied to outer nylon. This technology is guaranteed to be harder wearing, absorb less water and contain quick drying properties.
Mesh
Optimum core wind chill protection by absorbing solar heat and reducing evaporative cooling.
G-Tape
Inner waterproof X-Flex taping fuses seams together for additional reinforcement.
Glide Skin
Glide skin seals allows you to slip in and out of your wetsuit with ease and comfort.The flexible rubberised coating means you won’t get painful rubbing around your neck, allowing you to surf all day without irritation.
Aquaring
Wrist seals to reduce water penetration whilst increasing comfort, creating a snug fit on your wrist minimising flush.
Key Pocket
Streamline lower calf key pocket with drain hole and key loop.
S-Seal
Two thin strips of liquid neoprene sit on the inner wrist forming the perfect seal between skin and suit minimising flush.
Razorsole
Razorsole: razor cut channels increase grip and stability of the sole. Giving your feet maximum freedom.
G-Tape
G-tape: fused seams offer additional reinforcement creating a longer lasting boot.
Recoil
Recoil: is a 3D print band positioned over the top of the foot.This acts in a similar way to the retinaculum that helps keep your tendons in place, preventing rolling of the foot.
Leash Guard
Leash Guard: has been added to the flexor to prevent annoying leash jams.
H10 Sole
H10: bare foot feel rubber sole is ultra sensitive soft and flexible, but still offers the same outstanding grip expected from a thicker sole
Bodyboard Stringer
A stringer is the core part of a performance bodyboards construction. Stringers run down the middle of the board as a spine to keep the board intact and reduce it from any deformation when hit with any major force. Built from fibreglass.
View Products Discover More
Reversible
This product is Reversible
Neoprene
Flextex
Highly abrasion resistant triple knit neoprene. Provides high levels of durability combined with excellent stretch characteristics.
RS- Flex
Our latest evolution in neoprene! 150% Textured Stretch Neoprene, 20% lighter 30% less water absorption than X-Flex.
X-Flex
150% stretch neoprene is used in our high performance wetsuits. The latest X-FLEX neoprene is 10% lighter, absorbs less water and has a softer, more comfortable feel.
View Products Discover More
X-Flex Thermal
X-Flex Thermal- combines the performance of X-Flex neoprene with lightweight thermal insulating lining Thermospan.The benefits of combining these technologies create a 10% lighter wetsuit with increase thermal properties.
D-Flex
50% stretch neoprene. Flexible, warm, durable neoprene allowing you to perform for longer.
Duratex
Highly abrasion resistant Dura-Tex nylons created by applying a resin coating to the outer surface of a double knit nylon. Increases resistance to abrasion by up to 4-5 times.
Powertex
Four way stretch high specification knee panels designed to resist the most harsh elements while providing maximum flexion and extension of the knee.
RS- Flex
RS- FLEX- 150% Textured Stretch Neoprene, 20% lighter 30% less water Obsorption in your boot.
Wetsuit Entry System
Quadrate
This horizontal bib front entry system contains a micro blackout low profile waterproof chest zip.The Glideskin seals and the concealed bungee cord keeps water out. Eradicating the back zip gives extra stretch to the back of the suit. A snaplock ensures that the zip pull stays in place.
ABS
This diagonal zip entry system, has a single sided opening reducing flush. The Glideskin seal and bungee cord / barrel lock keeps more water out. A snap lock ensures that the zip pull stays in place.
UBS
Internal barrier shield prevents water penetration whilst increasing insulation and maintaining the wetsuits flexibility.
S-Lock
This easy entry back zip system contains a blackout waterproof zip. The zip is concealed by a unique twin flap smoothskin seal creating a flush barrier without the bulk of the UBS system.
Bodyboard Stringer